banner



How To Set Casio Dual Time Watch

Watch perfection for skinny wrists, Casio AQ230

Casio AQ230

Information technology'south hip to be foursquare.

This is not my first time owning a modest watch, only is the beginning time owning one I truly like, the Casio AQ230.

Let's get a few measurements out of the mode first.

My wrist at the thickest point is measures about six.75" around. However, my preference is to wear a lookout man at my wrist'due south thinnest bespeak, which measures nigh 6.5", or 165mm.

The AQ230'southward measurements are 38.8mm lug-to-lug, 29.8mm case size, 8.1mm thick. Very small...

...merely wow, does this thing fit my wrist nicely, and does and so without looking like a toy.

How to set the fourth dimension on the AQ230

Said up front, this picket is not like shooting fish in a barrel to fix. There are ii buttons on left and one on the right.

The right side push button is shrouded on purpose and so it does non get pressed accidentally, and its sole purpose is to prepare the analog clock. It can be used in any mode.

This right button is the but way to ready the hands equally at that place is no crown. When pressed momentarily, the minute mitt moves 20 seconds clockwise. When the button is held downward, the hands accelerate at a college speed. However, the annoying part is that if you accidentally go ahead of the time you lot're trying to gear up, you have to agree down that button and wait until the hands spin all the fashion around again. Why? Because the button only moves the hands clockwise and not in the reverse management.

The style I set the analog part of the picket is similar this:

  1. Gear up the digital clock first.
  2. Hold the right side button until it'southward 1 infinitesimal behind the digital clock.
  3. Wait for the digital clock to accomplish the next infinitesimal.
  4. Once the :00 arrives, I then accept xx seconds to synchronize the analog part. I match the minute to the digital clock, and the digital and analog clocks are at present synchronized.

This sounds complicated, but information technology'due south not. Not to me, anyhow.

Setting the digital fourth dimension:

  1. Press the lesser left until the fourth dimension is displayed without the "DL" in the lower left corner (which is Dual Time mode and not chief timekeeping).
  2. Press and concord bottom left until the seconds start flashing.
  3. Press top left to zero the seconds.
  4. Press bottom left to move to hour.
  5. Press top left to set the hour.
  6. Printing bottom left to motility to minutes.
  7. Press top left to set minutes.
  8. Press lesser left to move to 12/24 60 minutes choice.
  9. Press tiptop left to choose 12 or 24-hour fourth dimension.
  10. Press bottom left to exit.

Unique quirks of this AQ230

The AQ230 is the simply Casio watch I've ever owned that allows you to accept the main timekeeping every bit 12-hour time and the Dual Time mode as 24-hr or vice versa. Information technology is ordinarily the case where when you lot cull 12 or 24-hour, that applies to every time display on the watch. Not on the AQ230. You can have both.

Pressing and holding the top left button on any manner tests the alarm tone.

A very old schoolhouse feature: When setting the warning and go to ready the minutes, it's gear up by using the first half of the minutes, and so the second. This means if you lot were to set the warning  for 3:27, you ready the 60 minutes equally usual, then set the 2 by choosing 0 through 5, then the vii by choosing 0 through ix.

The stopwatch does not accept a lap time feature, not that I would ever use it.

The stopwatch is also operated entirely using i button. Bottom left button starts or stops the stopwatch. A long press on the lesser left resets it to nil.

Dual Fourth dimension is labeled every bit "DL" on the display and not "DT". Why? I take admittedly no idea.

This watch has the ability to show iii different times. Analog time, main timekeeping digital, and dual time digital. And yeah, they can all exist separate times from each other.

Brandish modes

The bottom digital panel can be switched from time to dual time, date, alarm or stopwatch.

Former school styling that is awesome

The AQ230 is very like to now-vintage Casio models released in the early 1980s, which is part of the reason I wanted it, and it does non disappoint.

Styling of this timepiece totally says "I'm from the late '70s/early '80s", especially when you become one like I did with sticks on the dial and non numbers.

It'south really like shooting fish in a barrel to miss that the AQ230 has an octagon shape, even if the corners are very slight.

The lack of a seconds paw actually makes the AQ230 wait much more than expensive than information technology is. If you lot know luxury timepieces at all, many of them don't have a seconds hand at all equally function of that "dazzler through minimalism" wait.

The 12-60 minutes marker is in fact a raised shiny stick that does reflect light.

The octagon corners do shimmer with light when the sun hits them.

The lugs practice in fact have drilled holes on the exterior that makes it very piece of cake to take off the bracelet. I like the bracelet equally-is and so I won't be doing that, but it's nice they're there.

I really, really like this picket

A timepiece similar this is a godsend for small-wristed folk like myself.

Easy to gear up? No. Only really comfortable, surprisingly easy to read and looks upscale.

I really dig information technology. Absolutely a keeper.

***Guitar deals & steals? Where? Right here. Toll drops, B-stock and tons more.

Source: https://menga.net/casio-aq230

0 Response to "How To Set Casio Dual Time Watch"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel